Anti Corrosion Paint Coatings 807 Thermal Power Plant Equipment Usage(RPM-807)

Anti Corrosion Paint Coatings 807 Thermal Power Plant Equipment Usage(RPM-807)

Anti Corrosion Paint Coatings Thermal Power Plant Equipment Usage(RPM-807)

Applications:

1. The apparatuses requiring warm keeping and heat insulation such as industrial mechanical equipment, reaction pot, high temperature steaming pipe, steaming boiler, mold, valve, cold store, oven, injection machine, water heater, pipe of central air conditioning, pipe of solar water heater, pipe of cold water.

2. Application temperature: -40℃—300℃.

3. The coating thickness hall be determined by the equipment temperature, generally, take the steaming pipe of about 200℃ for example, the surface temperature of 3mm thickness coating will reduce to about 80℃; the surface temperature of 5mm thickness coating will reduce to about 60℃.

4. Amazing energy saving effect: The investment can be recovered in one month, which greatly reduce the cost of production, increase the economic benefit, reduce the temperature of equipment & workshop, eliminate the hidden risk of accident, improve the working environment of workshop, increase the working efficiency, and extend the application life of equipment.

Application dosage: 3.L/㎡(for 3mm thickness of surface).

Construction method:

A. Clean the grease and dirt on the surface (one layer of rust preventing paint shall be coated on the rusted surface), and keep it dry;

B. The best temperature of the construction surface is about 15 to 60℃; the air humidity is less than 80%, the coating thickness per time is 1 to 1.5mm, to start the next pass after dry until obtain the required thickness;

C. Avoid operating the equipment when the coating is not thoroughly dried and solidified;

D. Stir the coating before construction and do not need to add water, apply the coating broom of proper hardness;

E. When coat the smooth surface for the 1st time, do not coat too thick, just 0.5mm is enough; after it turn dry, to make thick coating in the second pass..

F. When achieve the required thickness, and the coating turn dry and solidifying, to brush one layer of transparent varnish of dirt prevention and water proofs, which is beautiful and easy for equipment cleaning.

Packing specification: 20 L per barrel, 50L per barrel.

Storage: Tightly closed, store in the dry and cool area, storage period is one year. 

Project:

We are a professional manufacturer of water based paints & anti UV paints( major in heat insulation,waterproof,anti corrosion,mute,thermosensitive,luminescent ) in China for over 15 years in China.

RPM PAINT

+86-186 7518 5847                        

 Tel:+86 6391 2196;6325 1990;      

rpmpaint@126.com;            

Foshan Ruipeimu Intgelligent Coatings Co., Ltd. 

http://www.abrasivestools.com;                         

http://rpmpaint.ecer.com;